Besly Logo Besly Slogan  
Tap Pic  
Taps Dies Drills Reamers End Mills Misc Distributor About Us Home

Besly
Modern Application Taps
for Titanium Alloys

Special High Vanadium
Premium Steel (HSSE)

Spiral Point
2 and 3 Flute
DIN Length - ANSI Shanks

Metric Sizes:
M3 | M3.5 | M4 | M5 | M6 | M7 | M8 | M10 | M12

Catalog Numbers: 6534DA

Besly Modern Application Taps for Titanium Alloys 

Besly Modern Application Taps for Titanium Alloys are for commercially pure Titanium and annealed Titanium alloys such as 6AL-4V. 

Designed for use in through holes, the spiral point drives the chips forward. Special relief, point diameter, spiral point and chamfer geometry helps reduce heat that commonly causes tap seizure and breakage on reversal.

These taps are surface treated to reduce friction and come with plug (3-5 thread) chamfers. The DIN lengths with ANSI shanks feature accommodates the sometimes needed extra reach without the need for special taps and set-ups.

Please call 800 435-2965 for current net pricing.

Note: Click the EDP No to check availability.

   


 



All dimensions are in inches.
  Besly
Modern Application
Taps
for Titanium Alloys

Catl No. 6534DA

Metric Sizes
 
   
  Besly Surface Treatments Besly Drill Selector
Tap Size
& TPI
No. of
Flutes
Chamfer
Type
Pitch
Limit
Surface
Treat
EDP No Pkg Qty Nominal
Size
0d1
Overall
Length
I1
Thread
Length
I2
Thread
+ Neck
I3
Shank
Dia.
0d2
Square
Size
q
  M3 x .5 3 Plug D3 7 17108 12 M3 2.205 .312 .709 .141 .110
  M3.5 x .6 3 Plug D4 7 17109 12 M3.5 2.205 .375 .787 .141 .110
  M4 x .7 3 Plug D4 7 17111 12 M4 2.480 .375 .827 .168 .131
  M5 x .8 3 Plug D4 7 17112 12 M5 2.756 .500 .984 .194 .152
  M6 x 1 3 Plug D5 7 17113 12 M6 3.150 .625 1.181 .255 .191
  M7 x 1 3 Plug D5 7 17114 12 M7 3.543 .688 1.378 .318 .238
  M8 x 1.25 3 Plug D5 7 17116 12 M8 3.543 .688 1.378 .318 .238
  M8 x 1 3 Plug D5 7 17115 12 M8 3.543 .688 1.378 .318 .238
  M10 x 1.5 3 Plug D6 7 17118 12 M10 3.937 .750 1.535 .381 .286
  M10 x 1.25 3 Plug D5 7 17117 12 M10 3.937 .750 1.535 .381 .286
  M12 x 1.75 3 Plug D6 7 17120 12 M12 4.331 .938 - .367 .275
  M12 x 1.25 3 Plug D5 7 17119 12 M12 4.331 .938 - .367 .275
Go to the top of this page.